I spoke with Gary from Elecraft tonight re: the Power fluctuations and
read the tech note.
I put a 5k pot in place of r98 and set the pwr out to 10 watts (and the
PA to off).
I adjusted the pot then removed the pot measured it's value and
installed a fixed resistor (mine wound up to be 2.2k)
The power no longer fluctuates.
(It did fluctuate between 17 - 22W)
Simple fix!
Note: R98 is on the bottom near the pre-wound toroid.
Good luck!
=====
Harry - AB2PN
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
_______________________________________________
Elecraft mailing list: Elecraft@mailman.qth.net
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com
|